BVPJS - SX TONER
- MSDS: BVPJS
- Manufacturer: STATIC CONTROL COMPONENTS
- Product Name: SX TONER
- National Stock Number: 6850-00N053062
Product Identification
Product ID:SX TONER
MSDS Date:12/09/1993
FSC:6850
NIIN:00N053062
MSDS Number: BVPJS
Responsible Party
SANFORD, NC 27331
US
Emergency Phone: 919-774-3808;800-356-2728
Info Phone: 919-774-3808;800-356-2728
Cage: 0GAA9
Contractor
Telephone: 919-774-3808
Cage: 0GAA9
Ingredients
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
IRON OXIDE
CAS: 1332-37-2
RTECS: NO7380000
Fraction By Weight: 2%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NOT RELEVANT.
Medical Cond Aggravated by Exposure:NONE WHEN USED AS INTENDED IN THE
PRINTING EQUIPMENT FOR WHICH IT IS DESIGNED.
First Aid
First Aid:EYES:IMMEDIATELY FLUSH W/POTABLE WATER FOR MINIMUM OF 15
MINUTES, SEEK ASSISTANCE FROM MD . INHAL:REMOVE FROM EXPOSURE.
SKIN:WASH WITH SOAP AND WATER. INGEST:DRINK SEVERAL GLASSES OF
WATER.
Fire Fighting
Extinguishing Media:FOAM DRY CHEMICAL, CO*2, WATER SPRAY OR MIST.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . AVOID INHALATION OF SMOKE.
Unusual Fire/Explosion Hazard:MATERIAL IS COMBUSTIBLE. WHEN DISPENSED
IN AIR AS DUST IT CAN FORM EXPLOSIVE MIXTURES.
Accidental Release
Spill Release Procedures:LOOSE INK CAN BE REMOVED USING A VACUUM
CLEANER AND MAY BE SWEPT UP (AVOID DUST INHALATION-USE APPROPRIATE
DUST MASK IF NECESSARY).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA. AVOID PROLONGED INHALATION OF EXCESSIVE DUST.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHEN USED AS INTENDED. NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NORMALLY NONE REQUIRED.
Protective Gloves:NONE REQD WHEN USED AS INTENDED.
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE REQD WHEN USED AS INTENDED.
Work Hygienic Practices:NORMAL CARE IN HANDLING PARTICULATE MATERIAL.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>100
Spec Gravity:1.5-1.7(H*20-1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE BLACK POWDER, MILD, RESINOUS ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PRODUCTS OF COMBUSTION CAN BE TOXIC
DEPENDING ON CONDITION. AVOID BREATHING.
Disposal
Waste Disposal Methods:LANDFILL OR INCINERATE. ENSURE CONFORMITY WITH
FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.